<input id="h7rls"></input>

  • Hello! Welcome to the official website of Dongguan Huitong Electronics Co., Ltd.

    Home > News > Common problem

    Cautions for Fan motor Application

    2021-09-18 09:33 東莞市慧彤電子有限公司 PV 376

    Cautions for Fan motor Application

    Do not touch the blade and power cord to wrap the fan or pull the power cord. This will damage the shaft and power cord.


    2. Avoid dust, water droplets and insects, which may affect the life span and the production of bad products.


    3. Do not use in flammable gases or any harmful environment.


    4. Please use it within six months. Long-term storage will affect the fan performance due to the storage environment.


    5. When the fan is in operation, do not attempt to lock the fan for a very long time. This will cause the fan to burn down because of the continuous stop and high heat.


    6. When installing fans, please pay special attention to the noise caused by resonance or vibration.


    7. When the fan falls from the height of 60 cm in handling or operation, it will have some influence on the balance of the blade, especially the ball bearing to avoid falling.


    8. The torsion of the lock shell screw should not exceed 4Kgf. Do not block the fan with screwdriver, iron bar, etc. This will damage the fan.


    9. Do not touch the fan when the fan is running at high speed. If it is serious, it will hurt your finger.



    Dongguan Huitong Electronics Co., Ltd.
    Address: 28, No. 13 Lane, Baoan Ruin, Shuikou Village, Dalang Town, Dongguan City
    Contact person: Mr. Fang
    Tel: 0769-87082381
    Fax: 4008266163 to 19818
    Mobile phone: 1379068359

    2009 Dongguan Huitong Electronics Co., Ltd. Copyright All Guangdong ICP 11022682 Powered by Curtain Network
    亚洲av日韩av男人的天堂在线
    <input id="h7rls"></input>